How to install security cameras and ethernet in new home?

06Si

I am having a brand new house built, in the next couple of weeks it will be at the point where I need to install my own ethernet and security cameras before drywall goes up as the builders do not do this themselves. If anyone has any tips of how to online it will be much appreciated. I want ethernet in every room and 4 cameras out doors.

Answer
First off, plan. Walk the layout carefully and a paper map that you can mark up may be helpful as well. You can make a photocopy of a floor plan or hand draw this, it doesn't need to be exact, but you need a really good idea of where you are putting things.
Before you do anything else plan where your router will go. This is the most important thing to plan for because once the dry wall is up you will not be able to change your mind on it. Make sure to plan for any kind of ISP you may choose to have in the future, so both cable and telephone will need to be wired into this room where the router will be. That way if you decide to change ISP's they can install the modem in that same room. Trust me, nothing is worse than having your Ethernet wiring job perfect only to find out that it is then useless because you can't put the modem in the room designed for the router.
Make sure when you layout where the cables will go that they will be protected. None should be exposed to extreme heat or cold and you especially want to make sure they will not be accessible to small animals that may get under the house or into the attic. Small critters love to chew cables, they will destroy your Ethernet very fast and all will be for naught.
Install your patch panel. All of your Ethernet cables will need to run to a patch panel if you want this to look clean. I do not recommend putting the panel built into the wall, instead plan to have it in a place where you can quickly remove it from the wall so you can re-punch any runs that need it in the future.
Run the cables. Run each cable then from the patch panel to their destination making sure to leave slack at both ends, usually between 6 to 9 inches of slack on each end is plenty to then work with it. Do not punch down anything yet. Make sure when running the cable that it is out of the way of where the drywall will be installed and that you do not kink or crimp anywhere, especially around corners. A rule of thumb is that the Ethernet cable should never bend more than if you were to wrap it around your hand. That is about the tightest corner you want to make it do safely.
Attach the Ethernet cable up and out of the way using a staple gun with special wiring staples (they are wider and rounded so they don't kink the cable but you still need to be cautious when putting them in, don't puncture the cable at all) or you can use some nails hammered in on each side of the cable and bent over to hold them in place. the second method is safer but more time consuming.
When planning and running the cables run at least 1 spare to each outlet. This will help you out later if you make a mistake or need to replace one cable. You may also want to run a fish line, no not fishing line, a fish line. It can really be just about any durable string you can use to pull a cable through the wall after the drywall is in place in case you need to replace one cable.
Make sure to mark each cable on both ends. Come up with a system that works for you, I usually just number them then mark those numbers on my map. Some people designate the room the cable goes to a letter and the outlet gets a number then the port on that outlet gets a number as well so those look like: A-3-1 (just an example). By marking them all on both ends you can trace each wire out when you are ready to punch them down and know which port goes where.
Once they are all run, you have slack, you are positive they are out of the way for the dry wall to go up, just wait for the house to be finished. When it is done punch down your cables at the patch panel, punch down your ports for each outlet (don't put ports on the spare cables just leave them in the wall just for emergencies). Put your face plates up then you will need your modem plugged into your router, your router will need to plug into a switch (because you will probably need a lot more ports than a router will give you) then the switch will need to connect to your patch panel.
Once that is all connected and ready to go you will need to go around and test your ports. You may want an Ethernet tester for this to verify you have the correct pin out. I would recommend doing a search online for the pin out config.
For the security camera's I would recommend using WiFi capable cameras for outside and Ethernet connected ones for inside. Or go WiFi with all of them. Just make sure you have an electrician install a weatherproof/tamper-proof power outlet near where you want them and you are good.

Security Camera System Needed - Any Suggestions?

Char Char

I need a system that is for the outdoors (weather-proof), it needs to have at least 6 cameras. The cameras are going to be spread across 4.5 acres, so I need them to be either wireless or be able to buy a large qty. of cable to have the cables run underground to the main control panel. I would like for the cameras/control panel to be connected to the internet or our computer network for monitoring over the internet. I have read a little bit about the DVR/control panel the cameras hook-up to and as far as the storage it has I don't really care, as I will just erase the previous video, so I would say just enough for a day or two of recording.

I am new to cameras so this is why I am asking on here. If you could please provide a name of a company, a link to a website or a product/kit name that meets these requirements, that would be great. Thanks.

Answer
Hello

Not all CCTV equipment is created equal, in fact there are many options that offer varying performance take cars for example. In the world of CCTV you can find the equivalent of a $2,000 golf cart and a $350,000 Ferrari and everything in between. Both have 4 wheels but that's where the similarities end, itâs under the hood that counts.

One of the best posts ive seen on yahoo many are brutally incarcerate or blatant advertising attempts by online retailers: Caoedhen is dead right and one of the few people who understand CCTV and has worked with it for a while so many people buy a system online and think they know what there talking about.

ApexCCTV does not sell high end products and there IR cameras are not high quality they are from china and Taiwan and most have 48DB signal to noise ratio which is 100x more noise then a good cameras will have resulting in lower image quality and a larger file size on DVR`s (golf cart)

ApexCCTV standalone s are decent quality as they are made by avtech who makes great DVR`s for the residential and low budget market but not a high end solution by any means.

Apex CCTV PC based DVR`s are powered by either Avermedia or Geovision which are not high quality and there marketing greatly exceeds there products features an ability,

back to your question:

95% of all wireless cameras are compete junk and any wireless camera under $400 run on 1.2 or 2.4GHZ and don't offer encryption. This is bad for 2 reasons one the signal can easy be jammed, with a laptop you can actually hacked video feeds so a criminal can use it to spy and know a good time to target your business or home.

Now one option for wireless is using commercial IP radios which are basically wireless routers on steroids and can offer distances up to 40km of wireless with military encryption, this is not a cheap solution but neither is digging a trench. using these radios not only give you a security infrastructure but also communications infrastructures as well for internet and other purposes (LAN network)

Good radio company
http://www.tranzeo.com/

And yes you can do over 30 km no problem with these radios so 4.5 acres is easy to do. these radios are used by US military and I have done projects with them as well.

now in order to use this wireless network to distribute video you need to buy IP cameras which are similar to IP cameras only they transmit video over networks instead of a cable.

The company I recommend for CCTV products is Ascendent Technology Group they have a large product line and offer better products then Pelco Honeywell and Bosch and are about %20 cheaper and in my opinion have the best IR outdoor camera line up.

For an IP I recommend uses Ascendent`s IP servers that have a hard rive built in which does 3 things. Allows you use any analog camera and convert it into an IP addressable server. Allows you to distribute video over the network and has an HDD in it so that if the network goes don't or your NRV (network video recorder) goes down or gets stolen you have data redundancy. some companies use SD cards but to be honest that is quite useless low frame rate and only hours of recording.

http://dealer.ascendentgroup.com//ipnetworkvideo/x4-ip-pro-320-4.html


Also again Caoedhen is dead right you want more then 2 days of recording I can`t tell you how many times people have wanted to look at video up to 2 months and have done projects where they keep video for 3 years. I would suggest no less then a week of recording.

As far as cameras there are many types but for outdoor cameras you typically want IR cameras.

Ascendent has IR cameras that go from 50ft to 10km yes 10km longest in the world.

http://dealer.ascendentgroup.com//dvr-ir-cameras/23_1.html


If you talk to Ascendent and give them a diagram or layout they will design a system for you for free as long as you use there product. They will even test the tranzeo radios and make sure they work so they can send you a completely configured system.

I have used them on many installs and the odd time I received a defective unit they took care of me ASAP and they have great technical support.

http://www.ascendentgroup.com/

If you need anything feel free to email me
williammorales93@ymail.com

Powered by Yahoo! Answers

Anyone know pricing on security camera install?

MAKAVELI

I want to have 4 security cameras installed in a store but am not sure how much to pay someone to do it does anyone know what a decent amount to pay is? Its a 4 camera system that is wired and a computer that needs to be installed and setup any prices will be helpful. Thanks,
Well thanks for the thorough answer but what I meant was how much is a decent amount to pay for the installation of a four camera wired system? I already have the cameras I just want them installed but dont want to low ball the person he is charging me $250 right now but i told him i was shopping around still i think hell do it for $200?

Answer
With camera and survelience systems, you get what you pay for. Generally, the more you pay, the better features you get, and the more reliability. I would expect to pay at least $3k for a basic system. Here are some pointers:

1. Unless you just want the cameras for show, don't go with an off the shelf system like you can get at Costco or Sam's Club.

2. Don't do business with any company that hasn't been selling/installing cameras for at least four years. Ask for references.

3. Don't buy a Windows based camera system. Get one that is optimized for Camera usage. Many camera systems these days are based on custom implementations of Linux - a far better solution than Windows.

4. Don't cheap out on camera's. Good cameras + good recorder = better results. A camera system won't do you any good if you can't identify the people/cars/etc that your trying to record.

5. Buy a system that can handle at least 4 camera's more than you need right now. It is easier and less expensive in the long run to grow a system by just adding camera's than it is to replace the recorder.

6. Don't pay for your system and installation all at once. Have your purchase and installation contract broken down into stages - something like 25% deposit with order, 25% on delivery, 25% on installation and 25% due within 30 days of commissioning. Otherwise you could run into a situation where the camera company closes it's doors, or runs off with your money. I've seen this happen more than once.

I spent four years with a company that sold camera's and recording equipment as a side line. We were rather expensive compared to some of our competitors, because our main focus was another product line. However, on more than one occasion, people who went with the lowest bid often ended up coming to us for help upgrading or replacing their systems because of their good experiences with our other equipment. I saw more than one customer have the camera guy do a partial installation, then take off with the rest of the money, leaving the customer with no camera system. I also saw several customers get disgusted with their Windows based systems and either replace them entirely, or just stop using them at all.

Addressing your clarification: in my mind, $250 for installing the cameras is not only reasonable, it's extremely cheap. Most installers I'm aware of charge an average of between $50 and $125 an hour (depending upon your area). Depending upon the layout of the cameras and construction details of your building, I would figure an hour or two per camera, plus an hour or two to set up the recorder. My old company would have charged a minimum of $500 for the install, our typical install fee was $1500. Remember that iinstalling the cameras is more than just running the wires and mounting the cameras. It is also making sure they're pointed in the right directions, focused well, etc. Good luck.

who knows walmarts security camera layout? anyone work for walmarts loss prevetion team? please elaborate ..?

james m

ok, our loss prevention in walmart is horrible yet oddly enough works at times... I see a big black guy walking around between aisles peeking around corners to catch people, hmmm who can't spot him? well we have cameras too, do they watch them? or are most dummy cameras?

Answer
i wouldnt steal from walmart those cameras are all real and the can zoom in close enough to read print off a magazine

Powered by Yahoo! Answers

Outdoor security camera system?

Q. We have recently installed a chain link fence behind our home and are planning on letting our great pyreneese out during the day when we are at work so she is not kept in her kennel. We have an awning for shade and shelter, and we will be home around 4:30 or 5:00 each day to check on her. With that being said, we have had issues somewhat in our neighborhood, due to a busy road behind our house. I am not comfortable leaving my dog outside all day or at any time actually without some sort of security system to monitor and video my dog, in case someone was to stop or try to pester etc my dog. I have looked online and have found a ton of outdoor security cameras, however, I have no idea what I am even looking for. I want something that records so that if I come home and somethings amiss, I can check the recording to see what happened that day. I also am needing this to be wireless and obviously weatherproof. All information, models, reviews etc are greatly appreciated.
Rick B......If I find something amiss, the camera will help me to identify the vehicle that had stopped....I never once said my backyard was unsafe...I said we have had issues in the past (such as speeding cars....stolen lawn items) believe me I would not let my dog play outside if the area was a danger zone and I thought she would be harmed or killed, however, as a responsible adult, I would like to have eyes on the area when I cannot be around. I am very proud of you for taking such good care of your pet. I too live in a nice community outside of town, with a covered patio and a wooden fence surrounding my patio, both with gates and a doggy door for my 80 lb dog to retreat too if needed. I also have a locking gate on our chain link fence surrounding the rest of our yard. Once again, I never said that my area was a danger zone, but yes, I live in reality where every great once in a while there is a bratty kid that comes by speeding, or steals my neighbors lawn ornaments. I have d

Answer
Two types of systems:

1) Analog cameras connect to a DVR. The DVR connects to the computer network at your house. The DVR has the feature/functionality for the cameras (i.e., motion detection, send you email when an alarm event is triggered, local video storage for later review, etc.).

2) IP-network based cameras connect to the computer network at the house. The camera becomes a network node. For local video storage, a Network Video Recorder (NVR) is used.

Both methods have pros and cons. What I have found:

1) "Wireless camera" is an inaccurate description. The camera needs power (wire 1). For the first option, the wireless video signal is sent to a base station (or receiver). The receiver plugs into the DVR (video signal) and power (wires 2 and 3). Usually, these cameras are transmitting in the 2.4 Ghz range. This is a shared spectrum and can have interference from lots of sources - including wifi, garage door openers and cordless phones.

2) IP network cameras seem to be more expensive than the analog cameras. The imaging chip seems to be the first thing to go on any security camera, so I use the analog cams (connected to a DVR). The decent consumer cams start at about $150 or so. Less than this and I find myself replacing them at least annually - but at this price point (or higher), they seem to last a bit longer.

3) Because the DVR is on the network and maintains the features for the cameras - including network connectivity for remote viewing and storage, the cameras can be "dumb" = less expensive.

4) Set a budget. I like/use Swann and Lorex gear. It is more expensive than some others, but I have learned (the hard way) that you get what you pay for.

5) We don't know the yard layout. Generally, I would install cameras under the eaves of the house so they have some protection from the elements. We don't know where you are, but extreme heat and cold are not good for electronics. Installing under the eaves helps protect them from the elements (even though they are outdoor rated). If there are environmental extremes in your area, plan to replace the cameras often - or install them in protective housings. This also makes access to power a little easier if you go the wireless route. If you go with wired cameras, then running the single cable between a camera and the DVR may also be easier. That single cable has a couple of plugs on each side - one for power one for video.

You can have a mix of wired and wireless cameras.

6) Set a budget. For just the cameras and DVR, plan on about $1,000. If you can do the installation, great - otherwise, plan on that expense. Again, we don't know the layout... I suggest starting with a 8 or 9-camera DVR, but with 4 cameras. Example:
http://www.amazon.com/DVR8-3200-Channel-Digital-Recorder-SWDVK-832004S-US/dp/B00GBYMUNO
The DVR has a large internet hard drive, 4 cameras get you started and when you want to add more, you have capacity. You do not need to use Swann cameras... but these
http://www.amazon.com/Swann-SWPRO-760CAM-US-Pro-760-Wide-Angle-Camera/dp/B008B4K7O6
I like a lot.

If you choose to use only 4 cameras for your stated purpose, no big deal - add cameras to the front and side of the house if you want... or leave the channels unused.

7) You can provision the DVR to send you email when there is an "alarm". If you set up the motion detection areas, that can be an "alarm". Be careful with this - you can end up spamming yourself with unnecessary email alarm alerts.

8) If you are familiar with how routers work, you can set up remote access through your home's router and get into the DVR remotely (after you get an email alert) using a smartphone with an installed client or a computer (Windows or Macintosh).

9) POWER:
if you are concerned about power outages and losing video then some sort of power back-up will be needed. This is where the wired cameras are easier - with the power and video signal coming to a single place, the DVR and all cameras can be plugged into a "UPS" commonly used for computers. And if the DVR is located near the computer network router, that can be plugged into the UPS, too. If "wireless" cameras are used, then each camera will need its own battery backup power supply.

Anyone know pricing on security camera install?

MAKAVELI

I want to have 4 security cameras installed in a store but am not sure how much to pay someone to do it does anyone know what a decent amount to pay is? Its a 4 camera system that is wired and a computer that needs to be installed and setup any prices will be helpful. Thanks,
Well thanks for the thorough answer but what I meant was how much is a decent amount to pay for the installation of a four camera wired system? I already have the cameras I just want them installed but dont want to low ball the person he is charging me $250 right now but i told him i was shopping around still i think hell do it for $200?

Answer
With camera and survelience systems, you get what you pay for. Generally, the more you pay, the better features you get, and the more reliability. I would expect to pay at least $3k for a basic system. Here are some pointers:

1. Unless you just want the cameras for show, don't go with an off the shelf system like you can get at Costco or Sam's Club.

2. Don't do business with any company that hasn't been selling/installing cameras for at least four years. Ask for references.

3. Don't buy a Windows based camera system. Get one that is optimized for Camera usage. Many camera systems these days are based on custom implementations of Linux - a far better solution than Windows.

4. Don't cheap out on camera's. Good cameras + good recorder = better results. A camera system won't do you any good if you can't identify the people/cars/etc that your trying to record.

5. Buy a system that can handle at least 4 camera's more than you need right now. It is easier and less expensive in the long run to grow a system by just adding camera's than it is to replace the recorder.

6. Don't pay for your system and installation all at once. Have your purchase and installation contract broken down into stages - something like 25% deposit with order, 25% on delivery, 25% on installation and 25% due within 30 days of commissioning. Otherwise you could run into a situation where the camera company closes it's doors, or runs off with your money. I've seen this happen more than once.

I spent four years with a company that sold camera's and recording equipment as a side line. We were rather expensive compared to some of our competitors, because our main focus was another product line. However, on more than one occasion, people who went with the lowest bid often ended up coming to us for help upgrading or replacing their systems because of their good experiences with our other equipment. I saw more than one customer have the camera guy do a partial installation, then take off with the rest of the money, leaving the customer with no camera system. I also saw several customers get disgusted with their Windows based systems and either replace them entirely, or just stop using them at all.

Addressing your clarification: in my mind, $250 for installing the cameras is not only reasonable, it's extremely cheap. Most installers I'm aware of charge an average of between $50 and $125 an hour (depending upon your area). Depending upon the layout of the cameras and construction details of your building, I would figure an hour or two per camera, plus an hour or two to set up the recorder. My old company would have charged a minimum of $500 for the install, our typical install fee was $1500. Remember that iinstalling the cameras is more than just running the wires and mounting the cameras. It is also making sure they're pointed in the right directions, focused well, etc. Good luck.

Powered by Yahoo! Answers

Anyone know pricing on security camera install?

MAKAVELI

I want to have 4 security cameras installed in a store but am not sure how much to pay someone to do it does anyone know what a decent amount to pay is? Its a 4 camera system that is wired and a computer that needs to be installed and setup any prices will be helpful. Thanks,
Well thanks for the thorough answer but what I meant was how much is a decent amount to pay for the installation of a four camera wired system? I already have the cameras I just want them installed but dont want to low ball the person he is charging me $250 right now but i told him i was shopping around still i think hell do it for $200?

Answer
With camera and survelience systems, you get what you pay for. Generally, the more you pay, the better features you get, and the more reliability. I would expect to pay at least $3k for a basic system. Here are some pointers:

1. Unless you just want the cameras for show, don't go with an off the shelf system like you can get at Costco or Sam's Club.

2. Don't do business with any company that hasn't been selling/installing cameras for at least four years. Ask for references.

3. Don't buy a Windows based camera system. Get one that is optimized for Camera usage. Many camera systems these days are based on custom implementations of Linux - a far better solution than Windows.

4. Don't cheap out on camera's. Good cameras + good recorder = better results. A camera system won't do you any good if you can't identify the people/cars/etc that your trying to record.

5. Buy a system that can handle at least 4 camera's more than you need right now. It is easier and less expensive in the long run to grow a system by just adding camera's than it is to replace the recorder.

6. Don't pay for your system and installation all at once. Have your purchase and installation contract broken down into stages - something like 25% deposit with order, 25% on delivery, 25% on installation and 25% due within 30 days of commissioning. Otherwise you could run into a situation where the camera company closes it's doors, or runs off with your money. I've seen this happen more than once.

I spent four years with a company that sold camera's and recording equipment as a side line. We were rather expensive compared to some of our competitors, because our main focus was another product line. However, on more than one occasion, people who went with the lowest bid often ended up coming to us for help upgrading or replacing their systems because of their good experiences with our other equipment. I saw more than one customer have the camera guy do a partial installation, then take off with the rest of the money, leaving the customer with no camera system. I also saw several customers get disgusted with their Windows based systems and either replace them entirely, or just stop using them at all.

Addressing your clarification: in my mind, $250 for installing the cameras is not only reasonable, it's extremely cheap. Most installers I'm aware of charge an average of between $50 and $125 an hour (depending upon your area). Depending upon the layout of the cameras and construction details of your building, I would figure an hour or two per camera, plus an hour or two to set up the recorder. My old company would have charged a minimum of $500 for the install, our typical install fee was $1500. Remember that iinstalling the cameras is more than just running the wires and mounting the cameras. It is also making sure they're pointed in the right directions, focused well, etc. Good luck.

who knows walmarts security camera layout? anyone work for walmarts loss prevetion team? please elaborate ..?

james m

ok, our loss prevention in walmart is horrible yet oddly enough works at times... I see a big black guy walking around between aisles peeking around corners to catch people, hmmm who can't spot him? well we have cameras too, do they watch them? or are most dummy cameras?

Answer
i wouldnt steal from walmart those cameras are all real and the can zoom in close enough to read print off a magazine

Powered by Yahoo! Answers

How to install security cameras and ethernet in new home?

best security camera layout image

06Si

I am having a brand new house built, in the next couple of weeks it will be at the point where I need to install my own ethernet and security cameras before drywall goes up as the builders do not do this themselves. If anyone has any tips of how to online it will be much appreciated. I want ethernet in every room and 4 cameras out doors.

Answer
First off, plan. Walk the layout carefully and a paper map that you can mark up may be helpful as well. You can make a photocopy of a floor plan or hand draw this, it doesn't need to be exact, but you need a really good idea of where you are putting things.
Before you do anything else plan where your router will go. This is the most important thing to plan for because once the dry wall is up you will not be able to change your mind on it. Make sure to plan for any kind of ISP you may choose to have in the future, so both cable and telephone will need to be wired into this room where the router will be. That way if you decide to change ISP's they can install the modem in that same room. Trust me, nothing is worse than having your Ethernet wiring job perfect only to find out that it is then useless because you can't put the modem in the room designed for the router.
Make sure when you layout where the cables will go that they will be protected. None should be exposed to extreme heat or cold and you especially want to make sure they will not be accessible to small animals that may get under the house or into the attic. Small critters love to chew cables, they will destroy your Ethernet very fast and all will be for naught.
Install your patch panel. All of your Ethernet cables will need to run to a patch panel if you want this to look clean. I do not recommend putting the panel built into the wall, instead plan to have it in a place where you can quickly remove it from the wall so you can re-punch any runs that need it in the future.
Run the cables. Run each cable then from the patch panel to their destination making sure to leave slack at both ends, usually between 6 to 9 inches of slack on each end is plenty to then work with it. Do not punch down anything yet. Make sure when running the cable that it is out of the way of where the drywall will be installed and that you do not kink or crimp anywhere, especially around corners. A rule of thumb is that the Ethernet cable should never bend more than if you were to wrap it around your hand. That is about the tightest corner you want to make it do safely.
Attach the Ethernet cable up and out of the way using a staple gun with special wiring staples (they are wider and rounded so they don't kink the cable but you still need to be cautious when putting them in, don't puncture the cable at all) or you can use some nails hammered in on each side of the cable and bent over to hold them in place. the second method is safer but more time consuming.
When planning and running the cables run at least 1 spare to each outlet. This will help you out later if you make a mistake or need to replace one cable. You may also want to run a fish line, no not fishing line, a fish line. It can really be just about any durable string you can use to pull a cable through the wall after the drywall is in place in case you need to replace one cable.
Make sure to mark each cable on both ends. Come up with a system that works for you, I usually just number them then mark those numbers on my map. Some people designate the room the cable goes to a letter and the outlet gets a number then the port on that outlet gets a number as well so those look like: A-3-1 (just an example). By marking them all on both ends you can trace each wire out when you are ready to punch them down and know which port goes where.
Once they are all run, you have slack, you are positive they are out of the way for the dry wall to go up, just wait for the house to be finished. When it is done punch down your cables at the patch panel, punch down your ports for each outlet (don't put ports on the spare cables just leave them in the wall just for emergencies). Put your face plates up then you will need your modem plugged into your router, your router will need to plug into a switch (because you will probably need a lot more ports than a router will give you) then the switch will need to connect to your patch panel.
Once that is all connected and ready to go you will need to go around and test your ports. You may want an Ethernet tester for this to verify you have the correct pin out. I would recommend doing a search online for the pin out config.
For the security camera's I would recommend using WiFi capable cameras for outside and Ethernet connected ones for inside. Or go WiFi with all of them. Just make sure you have an electrician install a weatherproof/tamper-proof power outlet near where you want them and you are good.

Anyone know pricing on security camera install?

MAKAVELI

I want to have 4 security cameras installed in a store but am not sure how much to pay someone to do it does anyone know what a decent amount to pay is? Its a 4 camera system that is wired and a computer that needs to be installed and setup any prices will be helpful. Thanks,
Well thanks for the thorough answer but what I meant was how much is a decent amount to pay for the installation of a four camera wired system? I already have the cameras I just want them installed but dont want to low ball the person he is charging me $250 right now but i told him i was shopping around still i think hell do it for $200?

Answer
With camera and survelience systems, you get what you pay for. Generally, the more you pay, the better features you get, and the more reliability. I would expect to pay at least $3k for a basic system. Here are some pointers:

1. Unless you just want the cameras for show, don't go with an off the shelf system like you can get at Costco or Sam's Club.

2. Don't do business with any company that hasn't been selling/installing cameras for at least four years. Ask for references.

3. Don't buy a Windows based camera system. Get one that is optimized for Camera usage. Many camera systems these days are based on custom implementations of Linux - a far better solution than Windows.

4. Don't cheap out on camera's. Good cameras + good recorder = better results. A camera system won't do you any good if you can't identify the people/cars/etc that your trying to record.

5. Buy a system that can handle at least 4 camera's more than you need right now. It is easier and less expensive in the long run to grow a system by just adding camera's than it is to replace the recorder.

6. Don't pay for your system and installation all at once. Have your purchase and installation contract broken down into stages - something like 25% deposit with order, 25% on delivery, 25% on installation and 25% due within 30 days of commissioning. Otherwise you could run into a situation where the camera company closes it's doors, or runs off with your money. I've seen this happen more than once.

I spent four years with a company that sold camera's and recording equipment as a side line. We were rather expensive compared to some of our competitors, because our main focus was another product line. However, on more than one occasion, people who went with the lowest bid often ended up coming to us for help upgrading or replacing their systems because of their good experiences with our other equipment. I saw more than one customer have the camera guy do a partial installation, then take off with the rest of the money, leaving the customer with no camera system. I also saw several customers get disgusted with their Windows based systems and either replace them entirely, or just stop using them at all.

Addressing your clarification: in my mind, $250 for installing the cameras is not only reasonable, it's extremely cheap. Most installers I'm aware of charge an average of between $50 and $125 an hour (depending upon your area). Depending upon the layout of the cameras and construction details of your building, I would figure an hour or two per camera, plus an hour or two to set up the recorder. My old company would have charged a minimum of $500 for the install, our typical install fee was $1500. Remember that iinstalling the cameras is more than just running the wires and mounting the cameras. It is also making sure they're pointed in the right directions, focused well, etc. Good luck.

Powered by Yahoo! Answers

Why do many grocery stores not allow taking pictures inside?

best security camera layout image

I am an architect who likes architecture as a hobby. Grocery stores in the LA area have told me "no" when I have tried to take pictures of their decor, for a strictly personal collection.

Answer
Part of the problem is corporate spying. Competitors want photos of stores to compare their layouts and customer counts.

Another part is store security. You do not want to make it easy for theives to circumvent security cameras.

What do you have to make on the ASVAB to be a Mass Communication Specialist (MC) in the Navy?

Alexis

I've looked online and I've seen you have to make a 110 by adding your VE and AR scores, but that doesn't sound right to me. I'd really appreciate it if someone would answer my question. I really need to know.
Don't copy and paste information on the job I am interested in. I obviously know what the job is. I just want to know what do you have to make on your line scores to get the job.

Answer
HERES WHAT i can find about MCS:

Mass Communication Specialist (MC) are Public Affairs and Visual Information experts. They present the Navy story to audiences in the Navy and to the rest of the world through a variety of media. MCs write and produce print and broadcast journalism news and feature stories for military and civilian newspapers, magazines, television and radio broadcast stations. They record still and video photography of military operations, exercises, and other Navy events. They serve overseas, on ships, and at stateside commands as photographers, public affairs specialists, newspaper and magazine staff, and TV and radio station staff and talent. MCs also create graphic designs in support of the public affairs mission, create and manage official websites, and perform high-speed, high-volume graphic reproduction.

The duties performed by MCs include:

Prepare and write news and feature articles for publication
Photograph events for publication and historic documentation
Operate and maintain a variety of state-of-the-art still and video cameras
Operate computer-based graphics software and desktop publishing systems
Create original visual information displays and graphics
Multi-media design and production
Design and manage public and secure websites
Layout and design military newspapers and magazines
Manage radio and television stations
Operate video and electronic imaging equipment
Operate digital electronic reproduction equipment
Edit video news, features, and documentation
Shoot still photographs and video for accident or incident investigations
Conduct interviews
Market stories
Perform as a Public Affairs Officer

Working Environment

Mass Communication Specialist may work outdoors or inside, on board aircraft carrier flight decks, in the field with combat construction units, or in air-conditioned broadcast stations. Work varies from using precision computer graphics equipment in an office, to strenuous work throughout a ship or station. Most MCs work on projects alone or with small teams, normally with little supervision. Their work is primarily mental and creative.

A-School (Job School) Information

25 weeks at Ft. Meade, Maryland

ASVAB Score Requirement: VE + AR = 110

Security Clearance Requirement: Secret

Sub-Specialties Available for This Rating: Navy Enlisted Classification Codes for MC

Other Requirements

60 month enlistment obligation
Must be a U.S. Citizen
Normal color vision is required

Current Manning Levels for This Rating: CREO Listing

Note: Advancement ( promotion ) opportunity and career progression are directly linked to a rating's manning level (i.e., personnel in undermanned ratings have greater promotion opportunity than those in overmanned ratings).

Sea/Shore Rotation for This Rating

First Sea Tour: 42 months
First Shore Tour: 48 months
Second Sea Tour: 36 months
Second Shore Tour: 48 months
Third Sea Tour: 36 months
Third Shore Tour: 48 months
Fourth Sea Tour: 36 months
Forth Shore Tour: 48 months

Note: Sea tours and shore tours for sailors that have completed four sea tours will be 36 months at sea followed by 36 months ashore until retirement.

Powered by Yahoo! Answers

How difficult is it to become a navy photographer?

best security camera layout image

dylanthoma

I currently work as a stills photographer in feature films and commercials. I've wanted to join the navy for a while but have only recently been able to honestly consider it. The reasons I want to leave the entertainment business and join the navy are so I can become a better person, serve my country, and gain experience outside of the entertainment business. Will my experience in photography make it easier for me to get that detail? Thanks in advance.

Answer
Ignore Erudite, He doesn't know what in the hell he is talking about.

Photographer's Mate (PH) no longer exists in the US Navy, the duties were rolled into a new Rating, Mass Communications Specialist (MC).

This rating was created in July 2006 by merging the following ratings: Journalist (JO), Photographer's Mate (PH), Draftsman (DM), and Lithographer's (LI).

The duties performed by MCs include:

Prepare and write news and feature articles for publication

Photograph events for publication and historic documentation

Operate and maintain a variety of state-of-the-art still and video cameras

Operate computer-based graphics software and desktop publishing systems

Create original visual information displays and graphics

Multi-media design and production

Design and manage public and secure websites

Layout and design military newspapers and magazines

Manage radio and television stations

Operate video and electronic imaging equipment

Operate digital electronic reproduction equipment

Edit video news, features, and documentation

Shoot still photographs and video for accident or incident investigations

Conduct interviews

Market stories

Perform as a Public Affairs Officer

ASVAB Score: VE + AR = 110

Other Requirements:
Must have normal color perception.
Must have normal hearing.
Must have no speech impediment.
Security Clearance, (SECRET) Requirement.
60 month obligation.
Must be U.S. citizen
Normal color perception is required

What device/software should I use to scan documents and convert to PDF format files?

Adam

I want to digitize some books so I can have access to them without the bulk. My plan is to saw off the binding, then put the pages into a full-duplex scanner to grab and image and form a PDF file.

What inexpensive devices and software might I use to accomplish this goal?

Thanks!

Answer
Try A-PDF Image to PDF, it is a simple, lightning-fast desktop utility program that lets you convert photos, drawings, scans and faxes into Acrobat PDF documents. A-PDF Image to PDF supports most image formats, including images from scanners or digital cameras. Before being converted, the images can be rotated, cropped or flipped, etc. Other features include the ability to set the page size, orientation, margin and layout of the output PDF document, change its properties, security setting and viewer options etc.

Powered by Yahoo! Answers

How can I improve my prologue for a sci-fi story?

best security camera layout image

Parker G.

I started a new story a couple weeks ago, and I'm kind of worried about info dump in the beginning of it. Does it seem like I'm giving too much information in the prologue? Any other suggestions for improvement would also be appreciated.
---
Prologue

10 minutes ago. 12:39 AM

Rok 9Q silently climbed up the wall of the brick building, his custom-made gloves and boots giving him the extra traction he needed to help keep his grip. He counted the floors silently as he passed them, numbering them in twelve different languages for practice. Once heâd reached the eighteenth floor, he stopped and considered how to open the window.
The microscopic scanners implanted in his brain silently fed him data, which seemed to flow across his eyes like he was reading a book. They told him that the window was made of simple glass in a wooden frame and lacked all of the complicated security systems found on most houses. Satisfied, he merely spent a moment jarring the window upwards before the lock snapped and he was able to lift it freely.
He opened the window just wide enough for him to crawl through, then silently stood inside and took in his surroundings. As he memorized the layout of the room, marking all exits and entrances, he mentally commanded all of the transmitters and scanners in his brain to shut down. At this point he didnât want any unnecessary information distracting him from the task at hand.
Unfortunately, even the infrared vision might divert his attention elsewhere if he kept it on. Some homes had security in place which could give off counterfeit heat signatures that resembled a human in every way, so any intruder in the home would mistakenly targeted the replica while the security company alerted the true resident of the trespasser.
With the NOUS currently in a non-active state, Rok 9Q was completely on his own. He no longer received threat assessment and analysis, as well as data construction of the building. It also meant that he was no longer able to send or receive communications from Base, and they couldnât tap into his mind to spy on him. To them, he was completely off the grid. He could do whatever he wanted, and no one would ever know. But he had a mission to complete, and nothing was going to sidetrack him from that tonight.
He could make out three doors in the room in which he had entered. The one on the opposite side of the window likely led to the hallway of the apartment building. He noted it as a possible exit route after the mission was completed. The adjacent was to where he was standing had two doors. The door farthest from him clearly led to a kitchen; there was an opening in the wall near it that displayed an oven and microwave. If he walked closer for a different angle he knew he would see a refrigerator and freezer somewhere in it too.
That left only one room. He sneaked over to it and put his ear to the door to see if it was in fact the room he was looking for. He heard faint breathing, but wasnât fully convinced. Breathing could be faked just like anything else.
He slowly turned the doorknob and stepped into the room. There was a woman sleeping on a bed, so he took out his picture and held it up for comparison. The photo was of a frowning woman staring resolutely at the camera. She had shoulder-length hair dyed a dark green color and light blue eyes. Easy enough to recognize.
He crept forward until he was kneeling across from where she was laying and held the photo up to her face. If he had his tech on, his facial recognition program could bring up her name almost instantly, but at this point it was faster to simply do the photo comparison. Yes, it was definitely her.
He withdrew his service pistol from an ankle holster and held it close to her head.
Suddenly her eyes snapped open and stared up at him from the pillow. Surprised, Rok 9Q reacted instincively. He pressed the gun into her temple and whispered, âDonât make a sound, or I kill you right now.â
She squinted at him a moment, then recognition flashed in her eyes. âYouâre one of those clones, arenât you?â
âYes.â
He should have left it at that, should have just killed her in that moment, but he didnât. And thatâs what led to his downfall.

Answer
Ok, I'll put in my two cents:

The good: I love the uniqueness of the story and the detail you provide throughout. Rok 9Q seems very programmed and methodical about everything he does. I assume his character will grow to include more personality throughout. The setting is also interesting as it combines both futuristic and contemporary elements.

About the info dump: You are perhaps a tad too detailed at times. If you're worried about readers gaining a mental image of your setting, don't be. Only give us enough information that's needed. With that being said, I'm being picky. I enjoy the detail given. My only suggestions: limit the paragraph where he is analyzing each room- he's already done that briefly in the paragraph before. Also, I'm not sure how I feel about telling the reader that his downfall is coming. I would probably be a tad more subtle with the foreshadowing.

Again, this is just my opinion. I think your story is off to a good start. Keep it up!

How difficult is it to become a navy photographer?

dylanthoma

I currently work as a stills photographer in feature films and commercials. I've wanted to join the navy for a while but have only recently been able to honestly consider it. The reasons I want to leave the entertainment business and join the navy are so I can become a better person, serve my country, and gain experience outside of the entertainment business. Will my experience in photography make it easier for me to get that detail? Thanks in advance.

Answer
Ignore Erudite, He doesn't know what in the hell he is talking about.

Photographer's Mate (PH) no longer exists in the US Navy, the duties were rolled into a new Rating, Mass Communications Specialist (MC).

This rating was created in July 2006 by merging the following ratings: Journalist (JO), Photographer's Mate (PH), Draftsman (DM), and Lithographer's (LI).

The duties performed by MCs include:

Prepare and write news and feature articles for publication

Photograph events for publication and historic documentation

Operate and maintain a variety of state-of-the-art still and video cameras

Operate computer-based graphics software and desktop publishing systems

Create original visual information displays and graphics

Multi-media design and production

Design and manage public and secure websites

Layout and design military newspapers and magazines

Manage radio and television stations

Operate video and electronic imaging equipment

Operate digital electronic reproduction equipment

Edit video news, features, and documentation

Shoot still photographs and video for accident or incident investigations

Conduct interviews

Market stories

Perform as a Public Affairs Officer

ASVAB Score: VE + AR = 110

Other Requirements:
Must have normal color perception.
Must have normal hearing.
Must have no speech impediment.
Security Clearance, (SECRET) Requirement.
60 month obligation.
Must be U.S. citizen
Normal color perception is required

Powered by Yahoo! Answers

What model of CCTV system comes with ADT security systems?

best security camera layout image

William

There are lots of consumer DVR CCTV camera systems and most of them come from the same blueprints and lousy software and cheap hardware.
What does ADT use when they install a security system with CCTV cameras?

Answer
youll find a better answer here..

http://adt-matrix.com/

ive used adt dvr's and the layout is really nice and user friendly compared to ones youll get for cheap online.

How can I improve my prologue for a sci-fi story?

Parker G.

I started a new story a couple weeks ago, and I'm kind of worried about info dump in the beginning of it. Does it seem like I'm giving too much information in the prologue? Any other suggestions for improvement would also be appreciated.
---
Prologue

10 minutes ago. 12:39 AM

Rok 9Q silently climbed up the wall of the brick building, his custom-made gloves and boots giving him the extra traction he needed to help keep his grip. He counted the floors silently as he passed them, numbering them in twelve different languages for practice. Once heâd reached the eighteenth floor, he stopped and considered how to open the window.
The microscopic scanners implanted in his brain silently fed him data, which seemed to flow across his eyes like he was reading a book. They told him that the window was made of simple glass in a wooden frame and lacked all of the complicated security systems found on most houses. Satisfied, he merely spent a moment jarring the window upwards before the lock snapped and he was able to lift it freely.
He opened the window just wide enough for him to crawl through, then silently stood inside and took in his surroundings. As he memorized the layout of the room, marking all exits and entrances, he mentally commanded all of the transmitters and scanners in his brain to shut down. At this point he didnât want any unnecessary information distracting him from the task at hand.
Unfortunately, even the infrared vision might divert his attention elsewhere if he kept it on. Some homes had security in place which could give off counterfeit heat signatures that resembled a human in every way, so any intruder in the home would mistakenly targeted the replica while the security company alerted the true resident of the trespasser.
With the NOUS currently in a non-active state, Rok 9Q was completely on his own. He no longer received threat assessment and analysis, as well as data construction of the building. It also meant that he was no longer able to send or receive communications from Base, and they couldnât tap into his mind to spy on him. To them, he was completely off the grid. He could do whatever he wanted, and no one would ever know. But he had a mission to complete, and nothing was going to sidetrack him from that tonight.
He could make out three doors in the room in which he had entered. The one on the opposite side of the window likely led to the hallway of the apartment building. He noted it as a possible exit route after the mission was completed. The adjacent was to where he was standing had two doors. The door farthest from him clearly led to a kitchen; there was an opening in the wall near it that displayed an oven and microwave. If he walked closer for a different angle he knew he would see a refrigerator and freezer somewhere in it too.
That left only one room. He sneaked over to it and put his ear to the door to see if it was in fact the room he was looking for. He heard faint breathing, but wasnât fully convinced. Breathing could be faked just like anything else.
He slowly turned the doorknob and stepped into the room. There was a woman sleeping on a bed, so he took out his picture and held it up for comparison. The photo was of a frowning woman staring resolutely at the camera. She had shoulder-length hair dyed a dark green color and light blue eyes. Easy enough to recognize.
He crept forward until he was kneeling across from where she was laying and held the photo up to her face. If he had his tech on, his facial recognition program could bring up her name almost instantly, but at this point it was faster to simply do the photo comparison. Yes, it was definitely her.
He withdrew his service pistol from an ankle holster and held it close to her head.
Suddenly her eyes snapped open and stared up at him from the pillow. Surprised, Rok 9Q reacted instincively. He pressed the gun into her temple and whispered, âDonât make a sound, or I kill you right now.â
She squinted at him a moment, then recognition flashed in her eyes. âYouâre one of those clones, arenât you?â
âYes.â
He should have left it at that, should have just killed her in that moment, but he didnât. And thatâs what led to his downfall.

Answer
Ok, I'll put in my two cents:

The good: I love the uniqueness of the story and the detail you provide throughout. Rok 9Q seems very programmed and methodical about everything he does. I assume his character will grow to include more personality throughout. The setting is also interesting as it combines both futuristic and contemporary elements.

About the info dump: You are perhaps a tad too detailed at times. If you're worried about readers gaining a mental image of your setting, don't be. Only give us enough information that's needed. With that being said, I'm being picky. I enjoy the detail given. My only suggestions: limit the paragraph where he is analyzing each room- he's already done that briefly in the paragraph before. Also, I'm not sure how I feel about telling the reader that his downfall is coming. I would probably be a tad more subtle with the foreshadowing.

Again, this is just my opinion. I think your story is off to a good start. Keep it up!

Powered by Yahoo! Answers

What device/software should I use to scan documents and convert to PDF format files?

best security camera layout image

Adam

I want to digitize some books so I can have access to them without the bulk. My plan is to saw off the binding, then put the pages into a full-duplex scanner to grab and image and form a PDF file.

What inexpensive devices and software might I use to accomplish this goal?

Thanks!

Answer
Try A-PDF Image to PDF, it is a simple, lightning-fast desktop utility program that lets you convert photos, drawings, scans and faxes into Acrobat PDF documents. A-PDF Image to PDF supports most image formats, including images from scanners or digital cameras. Before being converted, the images can be rotated, cropped or flipped, etc. Other features include the ability to set the page size, orientation, margin and layout of the output PDF document, change its properties, security setting and viewer options etc.

Why do many grocery stores not allow taking pictures inside?

I am an architect who likes architecture as a hobby. Grocery stores in the LA area have told me "no" when I have tried to take pictures of their decor, for a strictly personal collection.

Answer
Part of the problem is corporate spying. Competitors want photos of stores to compare their layouts and customer counts.

Another part is store security. You do not want to make it easy for theives to circumvent security cameras.

Powered by Yahoo! Answers

How can I improve my prologue for a sci-fi story?

best security camera layout image

Parker G.

I started a new story a couple weeks ago, and I'm kind of worried about info dump in the beginning of it. Does it seem like I'm giving too much information in the prologue? Any other suggestions for improvement would also be appreciated.
---
Prologue

10 minutes ago. 12:39 AM

Rok 9Q silently climbed up the wall of the brick building, his custom-made gloves and boots giving him the extra traction he needed to help keep his grip. He counted the floors silently as he passed them, numbering them in twelve different languages for practice. Once heâd reached the eighteenth floor, he stopped and considered how to open the window.
The microscopic scanners implanted in his brain silently fed him data, which seemed to flow across his eyes like he was reading a book. They told him that the window was made of simple glass in a wooden frame and lacked all of the complicated security systems found on most houses. Satisfied, he merely spent a moment jarring the window upwards before the lock snapped and he was able to lift it freely.
He opened the window just wide enough for him to crawl through, then silently stood inside and took in his surroundings. As he memorized the layout of the room, marking all exits and entrances, he mentally commanded all of the transmitters and scanners in his brain to shut down. At this point he didnât want any unnecessary information distracting him from the task at hand.
Unfortunately, even the infrared vision might divert his attention elsewhere if he kept it on. Some homes had security in place which could give off counterfeit heat signatures that resembled a human in every way, so any intruder in the home would mistakenly targeted the replica while the security company alerted the true resident of the trespasser.
With the NOUS currently in a non-active state, Rok 9Q was completely on his own. He no longer received threat assessment and analysis, as well as data construction of the building. It also meant that he was no longer able to send or receive communications from Base, and they couldnât tap into his mind to spy on him. To them, he was completely off the grid. He could do whatever he wanted, and no one would ever know. But he had a mission to complete, and nothing was going to sidetrack him from that tonight.
He could make out three doors in the room in which he had entered. The one on the opposite side of the window likely led to the hallway of the apartment building. He noted it as a possible exit route after the mission was completed. The adjacent was to where he was standing had two doors. The door farthest from him clearly led to a kitchen; there was an opening in the wall near it that displayed an oven and microwave. If he walked closer for a different angle he knew he would see a refrigerator and freezer somewhere in it too.
That left only one room. He sneaked over to it and put his ear to the door to see if it was in fact the room he was looking for. He heard faint breathing, but wasnât fully convinced. Breathing could be faked just like anything else.
He slowly turned the doorknob and stepped into the room. There was a woman sleeping on a bed, so he took out his picture and held it up for comparison. The photo was of a frowning woman staring resolutely at the camera. She had shoulder-length hair dyed a dark green color and light blue eyes. Easy enough to recognize.
He crept forward until he was kneeling across from where she was laying and held the photo up to her face. If he had his tech on, his facial recognition program could bring up her name almost instantly, but at this point it was faster to simply do the photo comparison. Yes, it was definitely her.
He withdrew his service pistol from an ankle holster and held it close to her head.
Suddenly her eyes snapped open and stared up at him from the pillow. Surprised, Rok 9Q reacted instincively. He pressed the gun into her temple and whispered, âDonât make a sound, or I kill you right now.â
She squinted at him a moment, then recognition flashed in her eyes. âYouâre one of those clones, arenât you?â
âYes.â
He should have left it at that, should have just killed her in that moment, but he didnât. And thatâs what led to his downfall.

Answer
Ok, I'll put in my two cents:

The good: I love the uniqueness of the story and the detail you provide throughout. Rok 9Q seems very programmed and methodical about everything he does. I assume his character will grow to include more personality throughout. The setting is also interesting as it combines both futuristic and contemporary elements.

About the info dump: You are perhaps a tad too detailed at times. If you're worried about readers gaining a mental image of your setting, don't be. Only give us enough information that's needed. With that being said, I'm being picky. I enjoy the detail given. My only suggestions: limit the paragraph where he is analyzing each room- he's already done that briefly in the paragraph before. Also, I'm not sure how I feel about telling the reader that his downfall is coming. I would probably be a tad more subtle with the foreshadowing.

Again, this is just my opinion. I think your story is off to a good start. Keep it up!

How difficult is it to become a navy photographer?

dylanthoma

I currently work as a stills photographer in feature films and commercials. I've wanted to join the navy for a while but have only recently been able to honestly consider it. The reasons I want to leave the entertainment business and join the navy are so I can become a better person, serve my country, and gain experience outside of the entertainment business. Will my experience in photography make it easier for me to get that detail? Thanks in advance.

Answer
Ignore Erudite, He doesn't know what in the hell he is talking about.

Photographer's Mate (PH) no longer exists in the US Navy, the duties were rolled into a new Rating, Mass Communications Specialist (MC).

This rating was created in July 2006 by merging the following ratings: Journalist (JO), Photographer's Mate (PH), Draftsman (DM), and Lithographer's (LI).

The duties performed by MCs include:

Prepare and write news and feature articles for publication

Photograph events for publication and historic documentation

Operate and maintain a variety of state-of-the-art still and video cameras

Operate computer-based graphics software and desktop publishing systems

Create original visual information displays and graphics

Multi-media design and production

Design and manage public and secure websites

Layout and design military newspapers and magazines

Manage radio and television stations

Operate video and electronic imaging equipment

Operate digital electronic reproduction equipment

Edit video news, features, and documentation

Shoot still photographs and video for accident or incident investigations

Conduct interviews

Market stories

Perform as a Public Affairs Officer

ASVAB Score: VE + AR = 110

Other Requirements:
Must have normal color perception.
Must have normal hearing.
Must have no speech impediment.
Security Clearance, (SECRET) Requirement.
60 month obligation.
Must be U.S. citizen
Normal color perception is required

Powered by Yahoo! Answers

What model of CCTV system comes with ADT security systems?

best security camera layout image

William

There are lots of consumer DVR CCTV camera systems and most of them come from the same blueprints and lousy software and cheap hardware.
What does ADT use when they install a security system with CCTV cameras?

Answer
youll find a better answer here..

http://adt-matrix.com/

ive used adt dvr's and the layout is really nice and user friendly compared to ones youll get for cheap online.

How can I improve my prologue for a sci-fi story?

Parker G.

I started a new story a couple weeks ago, and I'm kind of worried about info dump in the beginning of it. Does it seem like I'm giving too much information in the prologue? Any other suggestions for improvement would also be appreciated.
---
Prologue

10 minutes ago. 12:39 AM

Rok 9Q silently climbed up the wall of the brick building, his custom-made gloves and boots giving him the extra traction he needed to help keep his grip. He counted the floors silently as he passed them, numbering them in twelve different languages for practice. Once heâd reached the eighteenth floor, he stopped and considered how to open the window.
The microscopic scanners implanted in his brain silently fed him data, which seemed to flow across his eyes like he was reading a book. They told him that the window was made of simple glass in a wooden frame and lacked all of the complicated security systems found on most houses. Satisfied, he merely spent a moment jarring the window upwards before the lock snapped and he was able to lift it freely.
He opened the window just wide enough for him to crawl through, then silently stood inside and took in his surroundings. As he memorized the layout of the room, marking all exits and entrances, he mentally commanded all of the transmitters and scanners in his brain to shut down. At this point he didnât want any unnecessary information distracting him from the task at hand.
Unfortunately, even the infrared vision might divert his attention elsewhere if he kept it on. Some homes had security in place which could give off counterfeit heat signatures that resembled a human in every way, so any intruder in the home would mistakenly targeted the replica while the security company alerted the true resident of the trespasser.
With the NOUS currently in a non-active state, Rok 9Q was completely on his own. He no longer received threat assessment and analysis, as well as data construction of the building. It also meant that he was no longer able to send or receive communications from Base, and they couldnât tap into his mind to spy on him. To them, he was completely off the grid. He could do whatever he wanted, and no one would ever know. But he had a mission to complete, and nothing was going to sidetrack him from that tonight.
He could make out three doors in the room in which he had entered. The one on the opposite side of the window likely led to the hallway of the apartment building. He noted it as a possible exit route after the mission was completed. The adjacent was to where he was standing had two doors. The door farthest from him clearly led to a kitchen; there was an opening in the wall near it that displayed an oven and microwave. If he walked closer for a different angle he knew he would see a refrigerator and freezer somewhere in it too.
That left only one room. He sneaked over to it and put his ear to the door to see if it was in fact the room he was looking for. He heard faint breathing, but wasnât fully convinced. Breathing could be faked just like anything else.
He slowly turned the doorknob and stepped into the room. There was a woman sleeping on a bed, so he took out his picture and held it up for comparison. The photo was of a frowning woman staring resolutely at the camera. She had shoulder-length hair dyed a dark green color and light blue eyes. Easy enough to recognize.
He crept forward until he was kneeling across from where she was laying and held the photo up to her face. If he had his tech on, his facial recognition program could bring up her name almost instantly, but at this point it was faster to simply do the photo comparison. Yes, it was definitely her.
He withdrew his service pistol from an ankle holster and held it close to her head.
Suddenly her eyes snapped open and stared up at him from the pillow. Surprised, Rok 9Q reacted instincively. He pressed the gun into her temple and whispered, âDonât make a sound, or I kill you right now.â
She squinted at him a moment, then recognition flashed in her eyes. âYouâre one of those clones, arenât you?â
âYes.â
He should have left it at that, should have just killed her in that moment, but he didnât. And thatâs what led to his downfall.

Answer
Ok, I'll put in my two cents:

The good: I love the uniqueness of the story and the detail you provide throughout. Rok 9Q seems very programmed and methodical about everything he does. I assume his character will grow to include more personality throughout. The setting is also interesting as it combines both futuristic and contemporary elements.

About the info dump: You are perhaps a tad too detailed at times. If you're worried about readers gaining a mental image of your setting, don't be. Only give us enough information that's needed. With that being said, I'm being picky. I enjoy the detail given. My only suggestions: limit the paragraph where he is analyzing each room- he's already done that briefly in the paragraph before. Also, I'm not sure how I feel about telling the reader that his downfall is coming. I would probably be a tad more subtle with the foreshadowing.

Again, this is just my opinion. I think your story is off to a good start. Keep it up!

Powered by Yahoo! Answers

Anyone know pricing on security camera install?

best security camera layout image

MAKAVELI

I want to have 4 security cameras installed in a store but am not sure how much to pay someone to do it does anyone know what a decent amount to pay is? Its a 4 camera system that is wired and a computer that needs to be installed and setup any prices will be helpful. Thanks,
Well thanks for the thorough answer but what I meant was how much is a decent amount to pay for the installation of a four camera wired system? I already have the cameras I just want them installed but dont want to low ball the person he is charging me $250 right now but i told him i was shopping around still i think hell do it for $200?

Answer
With camera and survelience systems, you get what you pay for. Generally, the more you pay, the better features you get, and the more reliability. I would expect to pay at least $3k for a basic system. Here are some pointers:

1. Unless you just want the cameras for show, don't go with an off the shelf system like you can get at Costco or Sam's Club.

2. Don't do business with any company that hasn't been selling/installing cameras for at least four years. Ask for references.

3. Don't buy a Windows based camera system. Get one that is optimized for Camera usage. Many camera systems these days are based on custom implementations of Linux - a far better solution than Windows.

4. Don't cheap out on camera's. Good cameras + good recorder = better results. A camera system won't do you any good if you can't identify the people/cars/etc that your trying to record.

5. Buy a system that can handle at least 4 camera's more than you need right now. It is easier and less expensive in the long run to grow a system by just adding camera's than it is to replace the recorder.

6. Don't pay for your system and installation all at once. Have your purchase and installation contract broken down into stages - something like 25% deposit with order, 25% on delivery, 25% on installation and 25% due within 30 days of commissioning. Otherwise you could run into a situation where the camera company closes it's doors, or runs off with your money. I've seen this happen more than once.

I spent four years with a company that sold camera's and recording equipment as a side line. We were rather expensive compared to some of our competitors, because our main focus was another product line. However, on more than one occasion, people who went with the lowest bid often ended up coming to us for help upgrading or replacing their systems because of their good experiences with our other equipment. I saw more than one customer have the camera guy do a partial installation, then take off with the rest of the money, leaving the customer with no camera system. I also saw several customers get disgusted with their Windows based systems and either replace them entirely, or just stop using them at all.

Addressing your clarification: in my mind, $250 for installing the cameras is not only reasonable, it's extremely cheap. Most installers I'm aware of charge an average of between $50 and $125 an hour (depending upon your area). Depending upon the layout of the cameras and construction details of your building, I would figure an hour or two per camera, plus an hour or two to set up the recorder. My old company would have charged a minimum of $500 for the install, our typical install fee was $1500. Remember that iinstalling the cameras is more than just running the wires and mounting the cameras. It is also making sure they're pointed in the right directions, focused well, etc. Good luck.

How to control a web camera with a pic and save pictures on memory?

Q. Hi, I just want to know if somebody know how to control a web camera with a pic, saving the pictures on an external memory, if somebody has an idea of how to do it, would be wonderful. I promise to publish all layout and information to get this project done. The idea is to design this system focused on car security, I want that once the silence alarm is active, the camera starts to take pictures from inside and outside the car, and of course, the idea is make it easy (publishing code) for that everyone can do it.
Thanks and hope for your help.

Answer
A PIC sounds underpowered for this. You might be better off with a small 80x86 or ARM board running Linux.

Be sure to choose a webcam with proper Linux support. This is especially important if using an ARM processor. Some manufacturers provide only a binary blob driver for 80x86, but you will need the Source Code to recompile for ARM.

Powered by Yahoo! Answers

How difficult is it to become a navy photographer?

best security camera layout image

dylanthoma

I currently work as a stills photographer in feature films and commercials. I've wanted to join the navy for a while but have only recently been able to honestly consider it. The reasons I want to leave the entertainment business and join the navy are so I can become a better person, serve my country, and gain experience outside of the entertainment business. Will my experience in photography make it easier for me to get that detail? Thanks in advance.

Answer
Ignore Erudite, He doesn't know what in the hell he is talking about.

Photographer's Mate (PH) no longer exists in the US Navy, the duties were rolled into a new Rating, Mass Communications Specialist (MC).

This rating was created in July 2006 by merging the following ratings: Journalist (JO), Photographer's Mate (PH), Draftsman (DM), and Lithographer's (LI).

The duties performed by MCs include:

Prepare and write news and feature articles for publication

Photograph events for publication and historic documentation

Operate and maintain a variety of state-of-the-art still and video cameras

Operate computer-based graphics software and desktop publishing systems

Create original visual information displays and graphics

Multi-media design and production

Design and manage public and secure websites

Layout and design military newspapers and magazines

Manage radio and television stations

Operate video and electronic imaging equipment

Operate digital electronic reproduction equipment

Edit video news, features, and documentation

Shoot still photographs and video for accident or incident investigations

Conduct interviews

Market stories

Perform as a Public Affairs Officer

ASVAB Score: VE + AR = 110

Other Requirements:
Must have normal color perception.
Must have normal hearing.
Must have no speech impediment.
Security Clearance, (SECRET) Requirement.
60 month obligation.
Must be U.S. citizen
Normal color perception is required

What device/software should I use to scan documents and convert to PDF format files?

Adam

I want to digitize some books so I can have access to them without the bulk. My plan is to saw off the binding, then put the pages into a full-duplex scanner to grab and image and form a PDF file.

What inexpensive devices and software might I use to accomplish this goal?

Thanks!

Answer
Try A-PDF Image to PDF, it is a simple, lightning-fast desktop utility program that lets you convert photos, drawings, scans and faxes into Acrobat PDF documents. A-PDF Image to PDF supports most image formats, including images from scanners or digital cameras. Before being converted, the images can be rotated, cropped or flipped, etc. Other features include the ability to set the page size, orientation, margin and layout of the output PDF document, change its properties, security setting and viewer options etc.

Powered by Yahoo! Answers