Rabu, 18 September 2013

Any solutions to Build DVR Card for a Security Camera?

best security camera dvr on If you pay with e-check, it generally takes 5 working days to clear ...
best security camera dvr image



Bella.Yuan


A DVR card, or digital video recorder card, is an electronic device that is installed inside a computer to record video in digital format. Installing a DVR card is an alternative to buying more expensive security systems. Using a DVR card involves plugging the card into a home computer, connecting a security camera to the DVR card, and installing the DVR interface program in the computer,I need to collect solutions of building dvr card for security camera?


Answer
Locate the spots where you want to mount the security cameras.Run the coaxial cable from the camera to the computer that you will use to view the security camera.Open the cover of your computer system unit, or CPU. Locate a vacant PCI slot on the motherboard inside the computer CPU. Using a pair of pliers, remove the knockdown metal plate on the CPU chassis at the end of the PCI slot.Plug the DVR card onto the vacant PCI slot. Screw the metal tab at the end of the card to the computer chassis, using the screw supplied with the card. Plug the coaxial cable to any of the exposed dvr card at the rear of the computer.Plug the power supply cable to the nearest 120-volt wall receptacle. Turn on the computer.Open the DVR software program to view the program interface. View the camera image following the procedures instructed in the program.
Source from:http://www.dvr-securitysystem.com/ProductsType/SD-Card-Mobile-DVR.htm

How to remotely connect to a DVR security camera?




Christophe


Hello. I want to be able to access my security cameras at work from home. I got an app on my phone called "i-smart" to do this. I was able to access the cameras through this app while I was at work on the wi-fi at work, but once I switch to my phone's 3G or used the wi-fi at my house it told me connection failed and it would no longer connect. How can I fix this as to where I am able to connect remotely to the security cameras regardless of what internet connection I am using? Thanks!


Answer
The outputs on your standalone DVR conjointly use a configurable NO or Tar Heel State circuit which might be used for causative relays that may be accustomed trigger motors, door locks, activate lights, arm alarm systems, sound sirens and additional. just about any form of lightweight, buzzer, alarm, magnet or motor are often controlled directly or indirectly through NO or Tar Heel State alarm outputs from the standalone DVR. These outputs will then be controlled pass from home employing a laptop, permitting you extra management of your home through your security camera system.




Powered by Yahoo! Answers

Tidak ada komentar:

Posting Komentar