best home security camera dvr system image
ferretkiss
I would like to put some security cameras around the outside of the house, because of trouble with the neighbors. I would like to view what the cameras see, later. I think I would need at least three cameras, one on the car in the street, one on the front porch area, and one on the back yard area. Or maybe two in the front.
What is the best way to do this?
About how much would it cost?
Answer
It depends what you want to do with the video.
An inexpensive consumer 4-channel surveillance DVR is about $300.
Add in a 500 gig hard drive for about $70 (records the video).
4 cameras - Average $100 each for outdoor rated, night vision, so $400... budget around $1,000 for a low-end, multi-camera, system.
The expensive part is the labor. Are you planning to install it yourself? How will the camera's wires get from the camera to the DVR? Thinking "wireless" cameras? They still need electricity - so is there power where you want to install the cameras?
Actually, "wireless" security cameras use more wires than wired ones... The camera needs power (1 wire) and transmits video wirelessly to a base station. The base station needs power and a wire to the DVR. Total = 3 "wires". A wired camera has one long "combo" cable that carries video and power.
How do you want to monitor that video? The DVR has a video-out connection that can connect to any TV with a working, available, composite (yellow RCA jack) plug. More expensive DVRs can be added to a computer network...
Frys (and Frysdotcom) has a good selection of security and surveillance stuff...
It depends what you want to do with the video.
An inexpensive consumer 4-channel surveillance DVR is about $300.
Add in a 500 gig hard drive for about $70 (records the video).
4 cameras - Average $100 each for outdoor rated, night vision, so $400... budget around $1,000 for a low-end, multi-camera, system.
The expensive part is the labor. Are you planning to install it yourself? How will the camera's wires get from the camera to the DVR? Thinking "wireless" cameras? They still need electricity - so is there power where you want to install the cameras?
Actually, "wireless" security cameras use more wires than wired ones... The camera needs power (1 wire) and transmits video wirelessly to a base station. The base station needs power and a wire to the DVR. Total = 3 "wires". A wired camera has one long "combo" cable that carries video and power.
How do you want to monitor that video? The DVR has a video-out connection that can connect to any TV with a working, available, composite (yellow RCA jack) plug. More expensive DVRs can be added to a computer network...
Frys (and Frysdotcom) has a good selection of security and surveillance stuff...
Any solutions to Build DVR Card for a Security Camera?
Bella.Yuan
A DVR card, or digital video recorder card, is an electronic device that is installed inside a computer to record video in digital format. Installing a DVR card is an alternative to buying more expensive security systems. Using a DVR card involves plugging the card into a home computer, connecting a security camera to the DVR card, and installing the DVR interface program in the computer,I need to collect solutions of building dvr card for security camera?
Answer
Locate the spots where you want to mount the security cameras.Run the coaxial cable from the camera to the computer that you will use to view the security camera.Open the cover of your computer system unit, or CPU. Locate a vacant PCI slot on the motherboard inside the computer CPU. Using a pair of pliers, remove the knockdown metal plate on the CPU chassis at the end of the PCI slot.Plug the DVR card onto the vacant PCI slot. Screw the metal tab at the end of the card to the computer chassis, using the screw supplied with the card. Plug the coaxial cable to any of the exposed dvr card at the rear of the computer.Plug the power supply cable to the nearest 120-volt wall receptacle. Turn on the computer.Open the DVR software program to view the program interface. View the camera image following the procedures instructed in the program.
Source from:http://www.dvr-securitysystem.com/ProductsType/SD-Card-Mobile-DVR.htm
Locate the spots where you want to mount the security cameras.Run the coaxial cable from the camera to the computer that you will use to view the security camera.Open the cover of your computer system unit, or CPU. Locate a vacant PCI slot on the motherboard inside the computer CPU. Using a pair of pliers, remove the knockdown metal plate on the CPU chassis at the end of the PCI slot.Plug the DVR card onto the vacant PCI slot. Screw the metal tab at the end of the card to the computer chassis, using the screw supplied with the card. Plug the coaxial cable to any of the exposed dvr card at the rear of the computer.Plug the power supply cable to the nearest 120-volt wall receptacle. Turn on the computer.Open the DVR software program to view the program interface. View the camera image following the procedures instructed in the program.
Source from:http://www.dvr-securitysystem.com/ProductsType/SD-Card-Mobile-DVR.htm
Powered by Yahoo! Answers
Tidak ada komentar:
Posting Komentar