best security camera system for home use image
Isabella D
I already have an alarm system at home. Should I still install a home security camera?
Answer
Yes, this is a great deterrence. The crook is more likely to pass you by and hit a less well defended home, just like a bonehead will look for an unlocked car to hot wire.
Also, if the camera is hooked up to a recording device, you stand a good chance of catching and convicting a burglar if a break-in does happen.
This link will explain your options.
Yes, this is a great deterrence. The crook is more likely to pass you by and hit a less well defended home, just like a bonehead will look for an unlocked car to hot wire.
Also, if the camera is hooked up to a recording device, you stand a good chance of catching and convicting a burglar if a break-in does happen.
This link will explain your options.
What is a good home security camera system?
Cline
I am looking for an home security camera sytem that I could link with my tv on it's own channel.
Any suggestions?
Answer
You can do this a couple of different ways:
Method 1) Wireless cameras, transmitting to a Receiver. From the receiver run the signal into a modulator, which will output the video as an actual TV channel. You'd need to add the signal onto your video network using a splitter/combiner.
Method 2) Wireless cameras and receiver, and connect the output from the receiver to an unused video input on your TV. View the cameras by selecting the correct input using your TV remote. This is cheaper and simpler than Method 1.
Keep in mind that the first method using modulation can have problems. The quality of the pictures may be poor, due to interference from nearby channels on your TV network.
The second method is almost foolproof, since you're using the "raw" signal straight out of the receiver.
Good luck!
You can do this a couple of different ways:
Method 1) Wireless cameras, transmitting to a Receiver. From the receiver run the signal into a modulator, which will output the video as an actual TV channel. You'd need to add the signal onto your video network using a splitter/combiner.
Method 2) Wireless cameras and receiver, and connect the output from the receiver to an unused video input on your TV. View the cameras by selecting the correct input using your TV remote. This is cheaper and simpler than Method 1.
Keep in mind that the first method using modulation can have problems. The quality of the pictures may be poor, due to interference from nearby channels on your TV network.
The second method is almost foolproof, since you're using the "raw" signal straight out of the receiver.
Good luck!
Powered by Yahoo! Answers
Tidak ada komentar:
Posting Komentar