Sabtu, 19 April 2014

how I can set my security cameras on the internet?

Q. how I can set my security cameras on the internet. I have wire350 router and SHR104 samsung cameras, What I need to do?


Answer
Unless you have a dvr multiple cameras are pretty well useless. Either you need a recording program on a machine running 24/7 or a proper dvr. Either of these would have a remote viewing program which requires forwarding a port through your router to the machine. For a computer connected system you would also need to open the same port on the firewall. If they are IP cameras you would need to give each a static IP address outside the router DHCP pool of addresses but within the same subnet. You would also need to assign a different port to each camera. Then you have to set up forwarding of each port on the router to point to the appropriate address internally.

Trouble with putting pictures from my camera to my computer!?

Q. I was recently at a concert and took lots of pictures i put them on my computer and saved them into a folder when i went into the folder to view the pictures a notice came up saying TO HELP PROTECT YOUR COMPUTER, WINDOWS HAS CLOSED THIS PROGRAM. i don't know what to do! Can any one help me? Thanks Xxx


Answer
You could close the security program, but think it would be best to use the method described below. It does better and gives you more control.

The following information describes a way to move/copy photos to and from a computer and memory card.

Just received some pictures in an e-mail which I moved to the computer. Then copied these pictures to a memory card and could view them on my camera or show on TV.

If your computer has memory card slots, find the correct slot and copy pictures from the memory card to the computer.

If there are no memory card slots on your computer, purchase a Targus card reader at Walmart for $8.88 or another brand for less at Ritz/Wolf/Kit camera. Also, they do 3½ x 5" digital prints for 6¢ each on Tuesday and Wednesday.

CAUTION To prevent memory card corruption, keep batteries charged and don't delete. Wait for lights to stop flashing then turn camera off before removing memory. For card readers, double click Safely Remove Hardware. Select then click Stop and OK.

After you have the memory card plugged in, go to My Computer and open the memory card, select the picture you want to copy, and then copy to the My Pictures folder under My Documents under Documents and Settings.

If you have trouble with this, it may be easier to right click on Start and then left click Explore. Find and select the picture you want to copy and then at top left, click the X next to Folders to see a place to select Copy Files. Now select the My Picture folder. Make and select a sub folder then click Copy.


You can also copy from the computer to a memory card.

Have just been playing with this and found that it works really well, but you should first format the memory card in the camera because it adds files to the card you will need.

Next, take a picture of something with the camera.

Place the memory card in the card reader and go to My Computer.

Open the memory card and you should see a folder on the left (DCIM) that has your picture. Do not open the MISC folder on the right.

Double Click on the DCIM folder and you should see another folder e.g.,100HPM417, which includes the name of your camera. Double Click on that folder and you should see the picture you just took.

When you copy from the computer to a memory card, that is the folder where your pictures must be copied. You may only be able to copy one picture at a time.

One last thing, the file names of your pictures must not have any additional letters or those pictures will not be seen by the camera. Also, the file name format must match the file name of the picture you took e.g., HPIM1903. Rename files to the same format as your camera photos.

If you have trouble with this, it may be easier to right click on Start and then left click Explore. Find and select the pictures you want to copy and then near the top left, click the X next to Folders to see a place to select Copy files. You can then select the memory card folder e.g.,100HPM417, that you clicked to see the picture you took and click Copy.

Click this link for other camera tips and complete instructions on cleaning camera and battery electrical contacts.
http://www.google.com/base/a/4210404/D13701973093918363271




Powered by Yahoo! Answers

Tidak ada komentar:

Posting Komentar